Why are prone to cracking off conveyor belt joint

Strength of the joints Flexible Roller Conveyor than the normal lower the strength. General mechanically connected, joint strength can only reach 40-50% with body strength, way better

quality cold glue, the joint strength can reach 60-70%, while the hot glue joint strength can reach 80-90% ( meet

Head right way, no quality defects). Since the strength of joints is relatively low, if the bonding method is not correct, joint strength will be more low, such as surgery,

injuries to the next level when sanding cloth, sanding over-lap length is not enough, the number of steps is not enough, glue joints The rubber sex

Can be poor or have lapsed since the sulfur, excessive grinding rope, wire rope rust, joints strength will be greatly reduced, when in use, disconnect joints prone to the

phenomenon.
   In addition, the Plastic belt conveyor belt if you do not use sealing compound, or glue joints in the wrong direction, the joints prone to cracking (surface plastic parts).