2013年8月16日星期五

Pattern alkali conveyor belt maintenance

⒈ conveyor in the transport and storage, should be kept clean to avoid direct sunlight, rain and snow Baptist leaching, prevent acids, alkalis, oils, organic solvents and other

substances affecting the quality of rubber contact and one meter away from the heating device. ⒉ warehouse or storage temperature should be kept at -15 ℃ -

+40 ℃, relative humidity should be maintained between 50-80%. ⒊ in storage Belt conveyor must be placed, not folded, turning once during placement shall be on a quarterly

basis. ⒋ conveyor speed not more than 5.0 m / s, transport large blocks, abrasive materials and the use of a large fixed plow

Unloader device should maximize the use of low-speed. Beyond the prescribed speed, will affect the life of the tape. ⒌ pallet conveyor drive roller diameter and the relationship

between the fabric layers, supporting the drive roller bend pulley and idler groove angle on the requirements should be based on conveyor design requirements,

Reasonable selection. ⒍ material on the tape to reduce the impact and abrasion, feeding direction should shun the tape running direction; materials fall into the gap on the

tape should be minimized; mouth should avoid feeding roller or rollers just above; tape by material section should be shortened idler spacing and buffering measures taken

Shi. To prevent scratch tape, stop feeding device scraper cleaning device and unloading device and the contact portion of the tape should be appropriate hardness of the rubber

sheet, do not use fabric layer sandwiched tape head.

没有评论:

发表评论