Roller conveyors running FAQs

Roller conveyor Runtime Frequently Asked Questions:
1 , bend pulley and the drive roller to abnormal noise : this phenomenon is generally bearing damage , bearing at Elevator conveyor the gurgling sound, this time to replace the bearings .
2 , roller eccentricity will be issued when severe noise ; may be manufactured uneven thickness seamless steel rollers to produce to the centrifugal force greater ; during

processing center and the outer ends of the bearing hole circle center large deviations , the centrifugal force is too vertical conveyor large causing ground.
3 , belt conveyor working its drives, drive rollers and bend pulley and idlers will be issued when the unusual unusually noise, abnormal noise can be judged according to the

device to malfunction.
4 , a belt to a shorter life : life and belt to belt belt land use status and quality-related ; belt conveyor sweeper at work should be to ensure reliable and easy to use manner

, there should be no return belt materials ; users in selected after a model should also assess the quality of its manufacturing .
5 , reducer to off-axis : This phenomenon generally occurs in high speed shaft , the most common cause is the use of land to the first stage reducer vertical bevel gear shaft to

the high speed shaft .
6 , drives a high speed motor and reducer side coupling between the ground plane of issue unusual noise ; happen this noise should be timely to position the motor reducer to be

adjusted to avoid gearbox input shaft to break.