Conveyor conveyor belt deviation approach when

Roller conveyor conveyor belt deviation always check the location and processing methods are:
 1, check the belt conveyor idler horizontal centerline and the longitudinal centerline of the misalignment . If the misalignment exceeds 3mm, you should use idlers elongated

mounting holes on both sides to be adjusted . The specific method is biased which side of the conveyor , roller food conveyor forward lateral group which

Forward direction or the other side after the shift.
 3, check the material in the conveyor belt position. Material in the conveyor belt is not centered on the cross section will result in Metal detector for food belt deviation. If the material

is biased to the right , then the belt deviation to the left , and vice versa. Should be used as much as possible so that the material centered. To reduce or avoid such lose

Belt deviation increase blocking plate , changing the orientation and position of the material .
 3, check the head, tail rack bearing two plane deviation . If the deviation is greater than two planes 1mm, the response to adjustment of the two planes in the same plane .

Head drum adjustment method : When the right side of the drum belt deviation, the roller bearing right should move forward

Move backward or left bearing ; conveyor belt to the drum if left deviation, the roller bearing should be left or right to move forward bearing after the shift. Rear roller

adjustment method and the head drum opposite.