In the process of transportation belt running problem

Now uses a new type of Flat belt conveyor idler roller structures are available from the tube , gaskets , bearing , spindles , bearings, seals and other internal and external components.

Quantity, weight, bearing tube connected with poor reliability . To this end, adopt new forms of counter rotating spiral spring roller

, The structure of the bearing, fixed to the bearing seat on coil spring , the bearing , the spindle head hook , ring , ring and so on. The new belt is the original charging

chute improved materials fall easily cause air to water heat exchanger irregularities on the conveyor belt deviation, so the need to adjust the center

Blanking off the hopper point improvement blanking point is incorrect due to deviation. To this end , both sides of the charging chute can be made to swing the blocking plate ,

the use of the adjustment screw to adjust the blanking lever point. Conveyor normal operation, the vertical roller thrust belt is not , under the action of the spring reset ,

right

Side rollers automatically removed. This new model strongly reversible self-aligning roller frame group to overcome the traditional detuning torque is small, the effect is not

ideal problems, the detuning effect is good , simple structure, easy maintenance. But when we deal with the belt deviation is also the place to note that there is

Reasons for deviation when the conveyor belt is more complex , one with a way to deal with little success. May be necessary to adjust the roller frame , but also adjust the

rollers. No-load operation of the conveyor belt is difficult to find positive deviation , in which case , such as conveyor belts must be fully loaded , look at deviation and

decide whether

Adjusted. Sometimes belt running direction uncertain, Huzuohuyou , this is because of a loose belt , the tightness of the belt should be adjusted , it should not be wandering

processing . Belt conveyors in the production run is deviation, the conveyor installation and routine maintenance are inseparable. The

So, you want to install strict quality control, increase in the use of maintenance efforts to master the use of scientific and reasonable correction methods to give full play to

the role in the production belt , make it better for the production of services.