Installation of the conveyor 7 Tips

Conveyor belt installation can be applied to everyday life as well as a variety of industries, a very broad range of applications .

    1 , put on a conveyor belt take-up core rotating flexible shaft , and a good frame with roll , before attention on the shelves, under the direction of plastic cover not

stand opposite.
    2 shelves in the workplace should not Turn conveyor be open to the conveyor belt guide roll , and to fold conveyor has a sufficiently large radius of curvature , to prevent damage to the

conveyor belt , fold prohibit placing heavy objects on the conveyor belt.
    3 , if it is to replace the curve conveyor conveyor belt can be new and the old band together, unloading and installation of a new conveyor belt at the same time .
    4, for the operation of the conveyor level , at any point can cut the old conveyors, incline conveyors running direction , you need to choose the right cut-off point to

prevent the downturn caused due to weight control.
    5 , the conveyor belt will put a new positive position after the end of the tape with a clamp fixed, and then connected to the bypass roller and pulley rope traction device

through the conveyor belt in a balanced manner to the conveyor frame , traction to prevent the rack conveyor and squeeze each other .
    6 , the jig is fixed on one end of the belt conveyor frame, the other end through the other end of the tension pulley , the return conveyor roller until the no sag.
    7 , starting from the fixed tensioning means 100 ~ 150mm.