Conveyor Handling Precautions

Due to the negligence of staff, often have some hidden dangers when conveyor operation, please refer to the following points draw .
1 , labor protection products must be properly dressed before the operation .
2, must conduct a comprehensive inspection of the equipment before starting to exclude obstacles, confirmed the belt curve conveyor rotating parts and head , tail wheel , etc. No one before

boot .
3 , before starting to check whether the switch is in good condition , the first no-load operation, not free lift interlock protection , you must ring the bell warning three

minutes before starting .
4 , after the shutdown , the state of the belt must be vented to avoid load to stop and start .
5, the device operation should 90 degree turn conveyor always check the motor, reducer , both wheels, cleaning, leak case materials , inspection equipment lubrication , gear sound is normal,

functioning in various parts of the temperature must not exceed the specified value .
6 , the belt does not start up or slip when prohibited by pedals, chain , bar and other ways to deal with the child , when the device is in operation rotating parts is strictly

prohibited cleaning, touch operation of the site , not allowed to sit in the shade on the belt , rest, chat , are not allowed to cross below the belt or belt unprotected

Traffic.
7, downtime , you must cut off the power switch into the on-site " lockout " position , hang "Some people work NOT TURN ON" brand , and get in touch with the control and related

jobs.