Conveyor system analysis and design of the basic steps
Basic analysis of system design
The basic system design analysis include the following: to establish the system design goals, set the volume of transportation of materials, transport distance, material
processing methods, and to consider the future development requirements; collection of data about the material being transported, including fragmentation, bulk density and other
factors affecting treatment
Methods of characterization data; research available both inside and outside the factory floor space, attention may affect the types of roller conveyor systems or equipment
specification limit; study other site conditions and data: climatic conditions and public transport modes (rail, road and water transport, etc.); research plant energy, like
Compressed air, electricity, steam and gas and other supplies; research on past experience or a similar design system data; examine whether the material is sent to the
manufacturer's laboratory to test the necessity (for example pneumatic conveying system to carry the new material ).
The main steps of engineering design
From the above described method for engineering design can understand the concept of bulk solid material handling system design and analysis procedures should be designed. In
recent years, due to energy issues and the industry continues to progress, many engineering design company added a bulk solid materials transportation engineering
Department, the use of highly experienced engineers and technicians responsible for the whole system design work. Choose the world's most advanced technology and equipment,
industrial belt conveyor system design for a reasonable arrangement; selection of equipment meet the stringent requirements; rational use of space not only the area, but also
To control investment and shorten the construction cycle. To achieve these objectives, the design phase must have reasonable working procedures, as well as cooperation with
During the design before work, should be equipped with all the necessary information. First, according to material properties and the process parameters to study the transport
methods, routes and throughput, storage methods and storage, raw material input and product output mode, and to consider the type of transportation and storage equipment, etc.
And so on. Meanwhile, the reference to the relevant standards and site conditions, such as the buyer's specifications to check the system design and equipment selection has
affected or omissions.
According to the above considerations and research engineer responsible for the design of various factors and parameters can be summarized to conduct feasibility studies,
technical and economic comparison. After assessment, preliminary design.
In the preliminary design process for the system equipment selection and equipment data specified by the manufacturer should pay particular attention to the selected device
performance To learn more, others such as ordering the case, delivery date, equipment investment and the impact of design on other sectors . If the device support structure
Or foundation problems, pollution or dust problems, operational control of the complex and so on, until harmonization so far. In the initial design process, to negotiate with
the seller repeatedly research, control the investment under the premise of constantly modify the design, until both sides are satisfied. Then
Preliminary design cost estimate. Including equipment installed capacity is estimated as well as other indirect costs required. A detailed description of the preparation of the
After the above steps, from initial design to enter the detailed design stage. Detailed design has the following main tasks: engineering flowchart; equipment specifications;
Equipment List; system specification; system floorplan; equipment capacity table; cost estimates table; said operation control system
These data will be sent to the relevant departments as other professional engineering design basis and reference, such as civil, electrical, instrument control, and equipment
design department, while the purchasing department in cooperation with the inquiry, procurement and other work. After completion of inquiry, post purchase inspection department.
You can preselect several (usually four to five selection is limited) company at the same time, and ultimately to the best person for the selection of objects, submit the buyer
and the competent department for approval.