Belt conveyor operation and maintenance two

Operation of belt conveyors
1 off before checking conveyor belt, there is no harm obstacles. If there is, you want to get rid of obstacles;
(2) to observe before shutting down power supply is normal, if necessary, the deployment is to be measured to ensure that the gravity skatewheel conveyor equipment required for normal voltage;
3 If the inspection device is normal, you can shut down running;
a. inverter is used, please read the operating instructions for the drive.
b. using ratio control speed, the sequence of operations is as follows.

2 shutdown sequence: Close the control box power switch (power indicator lit) → Start Start button → the ratio control switch material handling conveyor is turned to the "ON" position → slowly rotating

speed control knob to the desired speed range. Make uniform run; Do not exceed 1500rpm ranges.

2 shutdown sequence: the ratio control knob slowly rotating back to the "0" position → conveyor to be stopped after the plane ratio control rotary switch to the "OFF" position

→ Turn off the start switch and power switch.