On the conveyor belt deviation encountered the phenomenon should carefully analyze the reasons

Conveyor running process will inevitably occur due to various reasons often belt deviation phenomenon, which not only can cause leakage of material , equipment, non-normal wear

and tear , but also reduce productivity , but also affect the whole equipment work. Therefore, the correct judgments

A Pipe conveyor belt deviation reasons but also timely to be excluded , is a very important and difficult task .
Deviation rule is: "run do not run loose tight " "run do not run high- low" , " do not run after running in front ." If both sides of the tightness of the belt is not the same,

then the tight side of the belt to move ; if the level is not the same on both sides of the belt , then the belt will move to the high side ; if the roller frame

Other device is not installed in the vertical section of the belt running direction , but on the front end , the rear end ( along the belt running direction ) , the belt will

move toward the rear end .
Deviation of the drum at the belt , mainly from the following two aspects to adjust : First roller bearing ends of the height of error, but also the drum axis is not level , it

will also cause deviation industrial conveyor , capable of bearing plus less shim to adjust the levelness of the drum axis . Second, roll

Cylinder centerline is not perpendicular to the center line of the conveyor can be adjusted bearing position , but also to ensure the conveyor roller centerline and

perpendicular to the centerline .
Belt deviation is a tricky thing, when detuning belt deviation should carefully analyze the reasons for , and then carefully observed , in order to remedy , to explore in

practice , gain experience. At the same time , but also to strengthen the belt routine maintenance and repair work ,

Can eliminate or reduce the belt deviation phenomenon, improve productivity and increase economic efficiency will play a better role .