Belt conveyor basic structure and working principle

    The basic structure of the conveyor belt are: tape around the drive pulley and tail by redirecting rollers form a polar ring belt , belt traction is carrying both

institutions . Bottom two rubber belt conveyor tapes from the rack-mounted rotating roller support. Upper section contains the shipping tape or re- working segment segment called by the trough

roller support, in order to increase carrying off the area, improve the transport capacity ; following paragraph tape is not called back to the empty cargo ship segment ,

commonly used plastic chain conveyor flat-shaped roller support. The role of the tape tensioning device is required for the proper functioning of the tensioning force provided .
    Belt conveyor working principle is : the motor -driven drive rollers rotate through active friction between the roller and the tape on the tape drive and tape goods with

continuous operation, when the goods carried to the end , due to the commutation of the tape and unloading, use of specialized devices can also uninstall any location in the

middle uninstall .